
Kintex-7 FPGAs Data Sheet:
DC and AC Switching Characteristics
DS182 (v2.8) March 4, 2014
Introduction
Kintex?-7 FPGAs are available in -3, -2, -1, and -2L speed
grades, with -3 having the highest performance. The -2L
devices can operate at either of two V CCINT voltages, 0.9V
and 1.0V and are screened for lower maximum static power.
When operated at V CCINT = 1.0V, the speed specification of
a -2L device is the same as the -2 speed grade. When
operated at V CCINT = 0.9V, the -2L performance and static
and dynamic power is reduced.
Product Specification
device). However, only selected speed grades and/or
devices are available in each temperature range.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The
parameters included are common to popular designs and
typical applications.
Available device and package combinations can be found in:
Kintex-7 FPGA DC and AC characteristics are specified in
commercial, extended, industrial, and military temperature
ranges. Except for the operating temperature range or
?
?
Defense-Grade 7 Series FPGAs Overview
( DS185 )unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that
is, the timing characteristics of a -1 speed grade military
device are the same as for a -1 speed grade commercial
DC Characteristics
Table 1: Absolute Maximum Ratings
(1)This Kintex-7 FPGA data sheet, part of an overall set of
documentation on the 7 series FPGAs, is available on the
Symbol
Description
Min
Max
Units
FPGA Logic
V CCINT
V CCAUX
V CCBRAM
V CCO
V CCAUX_IO
V REF
V IN (2)(3)(4)
V CCBATT
Internal supply voltage
Auxiliary supply voltage
Supply voltage for the block RAM memories
Output drivers supply voltage for 3.3V HR I/O banks
Output drivers supply voltage for 1.8V HP I/O banks
Auxiliary supply voltage
Input reference voltage
I/O input voltage for 3.3V HR I/O banks
I/O input voltage for 1.8V HP I/O banks
I/O input voltage (when V CCO = 3.3V) for V REF and differential I/O standards except
Key memory battery backup supply
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.40
–0.55
–0.40
–0.5
1.1
2.0
1.1
3.6
2.0
2.06
2.0
V CCO + 0.55
V CCO + 0.55
2.625
2.0
V
V
V
V
V
V
V
V
V
V
V
GTX Transceiver
V MGTAVCC
V MGTAVTT
V MGTVCCAUX
V MGTREFCLK
Analog supply voltage for the GTX transmitter and receiver circuits
Analog supply voltage for the GTX transmitter and receiver termination circuits
Auxiliary analog Quad PLL (QPLL) voltage supply for the GTX transceivers
GTX transceiver reference clock absolute input voltage
–0.5
–0.5
–0.5
–0.5
1.1
1.32
1.935
1.32
V
V
V
V
? 2011–2014 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Kintex, Artix, Zynq, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx in the
United States and other countries. All other trademarks are the property of their respective owners.
DS182 (v2.8) March 4, 2014
Product Specification
1